SPOKANE · COEUR D’ALENE · NORTH IDAHO

Starlink installation in Spokane & North Idaho

Fast internet where the cable never reached. The dish is mounted to the roof structure, the roof penetration is flashed like any other, and the cable comes into the house sealed.

Most installs take 2 to 4 hours, and you are online before we leave.

Serving since 2020

★★★★★ 4.9 stars on Google 

Locally owned & operated
Free estimates

Why have a roofer install your Starlink?

Starlink sells the kit as do-it-yourself. The dish is the easy part. The mount has to reach a rafter, the hole it makes has to be flashed, and the dish has to see the northern sky. Skip any one of those and you get a leak, a dish in the yard after a windstorm, or buffering every evening.

BEFORE THE DISH GOES UP
What a good Starlink install needs
1. A clear view of the northern sky. Roughly 100 degrees of open sky with nothing above 25 degrees from the horizon.
2. A mount bolted to a rafter or blocking. Not screwed into shingles.
3. Flashing at the penetration. The same as a vent.
4. A sealed cable entry. Not a drilled hole with caulk in it.
5. A spot you can reach. To clear snow.
REMEDY ROOFWORKS · HAYDEN ID (208) 551-5703

What a Remedy Starlink installation includes

Placement, mounting, and setup. The roofing part is the part that matters.

Roof-safe mounting

The dish stays on and the roof stays dry.

Photo to come

Proper flashing and sealing

Every penetration gets flashing that integrates with the shingles and underlayment, the same as our roofing work.

Starlink dish mounted on a roof

Structural mounting

Lag bolts into rafters or blocking. Shingle-only mounts blow off in our winds and collapse under snow.

Photo to come

No roof damage

Mounting done wrong cracks shingles and voids roof warranties. Ours does not.

Starlink dish on its mount

Weather-ready hardware

Mounts and sealants rated for freeze-thaw.

Signal placement

Where the dish sits decides whether it works.

Photo to come

Clear sky assessment. We check trees, buildings, and terrain with the Starlink app’s obstruction checker and pick the spot with the cleanest northern view.

Photo to come

Obstruction avoidance. Partial tree cover causes buffering and dropouts. We find it before we mount anything.

Photo to come

Signal optimization. Positioned for the strongest signal from your roof and your surroundings.

Photo to come

Future-proofed placement. Tree growth and seasonal changes are considered so the signal holds up over time.

Complete setup

Mounted, wired, tested, and explained.

Photo to come

Clean cable routing. Cables run through the roof and walls with sealed entries. No exposed runs, no unsealed holes.

Photo to come

Router and network setup. Network name, password, and any extra equipment configured.

Photo to come

Performance testing. Signal strength and speeds verified before we leave. In Northern Idaho that is often 50 to 200+ Mbps.

Photo to come

Instruction and support. A walkthrough of the Starlink app: performance, stow for storms, and common fixes.

Mounting options

The roof and the sky view decide which one.

Standard roof mount.

The most common. Bolted to the structure, flashed at the penetration.

Ridge or elevated pole mount.

Extra height when trees or a neighboring roof get in the way.

Non-penetrating or pipe adapter mount.

For roof types that should not be drilled, or for an existing mast.

We recommend the mount after the site evaluation, not before.

Remedy RoofworksEST. NO. 20__-___
HOW AN INSTALL IS PRICED - WRITTEN PRICE BEFORE WORK STARTS
Standard roof mount installQuoted on site
Elevated pole or ridge mount installQuoted on site
Extended cable run, if neededItemized
Router or mesh setupItemized
Depends on mount type, cable run, and roof access
Your price is fixed in writing
before any work starts.
Nick Johnson
OWNER

What a Starlink installation costs in Spokane and North Idaho

The mount type, the cable run, and roof access set the price. Fixed in writing before we start.

Installed dishes

A mounted dish with visible flashing and a sealed cable entry show what a correct install looks like.

A roof-mounted dish with the flashing visible. Nick to supply.
STARLINK INSTALLS
Roof before the mountBefore
Dish mounted and flashedAfter
Standard roof mount. Bolted to the rafter, flashed at the penetration, cable sealed. [City, date]
Cable entry, close upBefore
Sealed grommet and conduitAfter
Weatherproof cable entry. The home's weather barrier stays intact. [City, date]

Does Starlink work in Northern Idaho winters?

Yes. The dish has built-in snow melting. Heavy snow can slow speeds temporarily. A proper mount keeps it on the roof through wind and snow loads.

Will the install void my roof warranty?

Not when it is done with proper flashing and sealing. A DIY install with a shingle-mounted dish often does.

What happens when you call

1

Site evaluation

We check the northern sky view, rafter locations, roof pitch, and access, and recommend a mount and location.

2

Written price

Mount, install, cable run, and setup, fixed before we start.

3

The install

Dish mounted to the structure, penetration flashed, cable routed and sealed, router configured. 2 to 4 hours for most homes.

4

Testing and handover

Speeds verified, the app walked through, and documentation of the install left with you.

Every Starlink installation is backed by the Remedy Workmanship Warranty on the roof work. Learn more →

Frequently asked questions about Starlink installation

Why hire a professional instead of DIY?

Mounting without correct flashing creates leaks that show up months later, and a dish in the wrong spot buffers and drops. Many DIY installs end up needing a professional fix.

Will it damage my roof or void the warranty?

Not when done with proper flashing and sealing. We use the same techniques as our roofing work.

Does Starlink work in winter here?

Yes. The dish melts snow off itself. Heavy snow can slow speeds for a while.

How long does installation take?

2 to 4 hours for most homes. Difficult access, long cable runs, or extra networking take longer.

What mounting options are there?

Standard roof mount, ridge mount, pipe adapter for an existing mast, non-penetrating mounts for certain roofs, and elevated pole mounts for heavy obstruction.

What does the install include?

Site evaluation, structural mounting, flashing, cable routing and sealing, router setup, speed testing, and a walkthrough of the app.

What speeds should I expect?

Often 50 to 200+ Mbps in Northern Idaho, confirmed by testing before we leave.

Can you connect it to my existing network?

Yes. Mesh systems, Ethernet adapters, and existing routers are set up and tested together.

SPOKANE · COEUR D’ALENE · NORTH IDAHO

Get a no-nonsense, no-pressure quote for your roofing project

As an owner-operated business, you can count on us to stand behind our commitments and provide an experience you'll be proud to recommend to your community. After all, we live here too!

Our service area

We work where we live

Remedy Roofworks is a small, owner-operated crew. Nick does the inspections himself, and there is a good chance he has already been up on a roof on your street. We stay inside a comfortable drive of home on purpose, so we can come back when you call.

WASHINGTON IDAHO I-90 HWY 41 Spokane Greenacres Coeur d'Alene Hayden Rathdrum
Towns with a page of their own Also covered
TOWNS WE KNOW WELL
And regularly out to

Post Falls, Dalton Gardens, Hauser, Twin Lakes, Athol, Liberty Lake, Otis Orchards, and the county roads in between.

Based in Hayden, ID
If you are near the line and not on the list, call anyway. We will tell you if we can get to you.